Guaranteed compatible upgrades for:

HP/Compaq ProLiant Server ML350p Gen8 (G8)

Sort by

Samsung PM883 7.68TB 2.5" 7mm SATA III Enterprise Internal SSD

Samsung SM883 3.8TB 2.5" 7mm SATA III Enterprise Internal SSD

Samsung PM883 960GB 2.5" 7mm SATA III Enterprise Internal SSD

Samsung PM883 480GB 2.5" 7mm SATA III Enterprise Internal SSD

Samsung PM883 240GB 2.5" 7mm SATA III Enterprise Internal SSD

Samsung 32GB (2x 16GB) DDR3L-1600 PC3L-12800 1.35V / 1.5V DR x4 ECC Registered 240-pin RDIMM RAM Kit

Save $19

Samsung 16GB (2x 8GB) DDR3L-1333 PC3L-10600 1.35V / 1.5V DR x4 ECC Registered 240-pin RDIMM RAM Kit

Samsung 8GB (2x 4GB) DDR3-1600 PC3-12800 1.5V DR x8 ECC Registered 240-pin RDIMM RAM Kit

Samsung 16GB (1x 16GB) DDR3L-1333 PC3L-10600 1.35V / 1.5V DR x4 ECC Registered 240-pin RDIMM RAM Module

Samsung 16GB (1x 16GB) DDR3L-1600 PC3L-12800 1.35V / 1.5V DR x4 ECC Registered 240-pin RDIMM RAM Module

Crucial 8GB (1x 8GB) DDR3L-1600 PC3L-12800 1.35V / 1.5V DR x8 ECC 240-pin EUDIMM RAM Module

Save $15

Samsung 8GB (1x 8GB) DDR3L-1600 PC3L-12800 1.35V / 1.5V DR x8 ECC Registered 240-pin RDIMM RAM Module

Samsung 8GB (1x 8GB) DDR3L-1333 PC3L-10600 1.35V / 1.5V DR x4 ECC Registered 240-pin RDIMM RAM Module

Samsung 8GB (1x 8GB) DDR3L-1600 PC3L-12800 1.35V / 1.5V SR x4 ECC Registered 240-pin RDIMM RAM Module

Micron 4GB (1x 4GB) DDR3L-1600 PC3L-12800 1.35V / 1.5V DR x8 ECC 240-pin EUDIMM RAM Module

Samsung 4GB (1x 4GB) DDR3-1600 PC3-12800 1.5V DR x8 ECC Registered 240-pin RDIMM RAM Module

NewerTech AdaptaDrive 2.5" to 3.5" Drive Converter Bracket

Save $5

System Specifications

Maximum Memory:

128GB ECC UDIMMs
384GB Reg ECC RDIMMs
768GB LRDIMMs

Expansion:

24 Sockets using two processors 12 Sockets (4 banks of 3) per processor

Standard Memory:

8GB (Removable) or
16GB (Removable)

CPU/Chipset:

Intel Xeon Intel C600 Series
Intel Xeon Intel C600 Series

Bus Architecture:

PCI Express; PCI-X; SSD - SATA 2.5-inch 9.5mm; SSD - SATA 3.5-inch

Mfr's System P/N's:

470065-652; 470065-713; 470065-818; 646675-001; 646676-001; 646677-001; 646678-001; 668889-035; 669045-425; 678237-001; 736974-035; 736974-425; 736978-045; 736978-425; 736983-S01

Upgrade Path:

Virtually any configuration up to 384GB can be reached using 8 and 16GB modules.

Comments:

General memory guidelines
This system supports Registered ECC (RDIMM) or Unbuffered ECC (ECC UDIMM) or Load Reduced (LRDIMM) memory.
Mixing RDIMM, ECC UDIMM and LRDIMM is not supported within this system.
If only one processor is installed, only 12 DIMM slots are available.
When populating with two processors 24 DIMM slots are available.
No more than two ECC UDIMMs may be installed per channel (2DPC).
It is recommended to install UDIMMs in first and third banks, leaving second bank (sockets 2, 5, 8, and 11) open.
1.35V LV RDIMMs up to 2DPC.
Adding additional memory of 3DPC will raise voltage to 1.5V.
Depending on the memory configuration and processor model, the memory speed may run at 1600MHz, 1333MHz or 1066MHz.
See latest ProLiant QuickSpecs for processor models and supported memory speeds.
4GB DDR3-1333 Reg ECC modules come in two versions: 313/4G using x4 and 3138/4G using x8 DRAM.
The two parts may be installed in the same system but not within the same memory bank.
Use like modules for dual and triple channel operation
White DIMM slots denote the first slot of a channel.
For 1 DPC (DIMM per channel) populate white slots only.
This system supports Registered ECC (RDIMM) or Unbuffered ECC (ECC UDIMM) or Load Reduced (LRDIMM) memory.
Mixing RDIMM, ECC UDIMM and LRDIMM is not supported within this system.
If only one processor is installed, only 12 DIMM slots are available.
When populating with two processors 24 DIMM slots are available.
No more than two ECC UDIMMs may be installed per channel (2DPC).
It is recommended to install UDIMMs in first and third banks, leaving second bank (sockets 2, 5, 8, and 11) open.
1.35V LV RDIMMs up to 2DPC.
Adding additional memory of 3DPC will raise voltage to 1.5V.
Depending on the memory configuration and processor model, the memory speed may run at 1600MHz, 1333MHz or 1066MHz.
See latest ProLiant QuickSpecs for processor models and supported memory speeds.
4GB DDR3-1333 Reg ECC modules come in two versions: 313/4G using x4 and 3138/4G using x8 DRAM.
The two parts may be installed in the same system but not within the same memory bank.
Use like modules for dual and triple channel operation
Install DIMMs only if the corresponding processor is installed.
If only one processor is installed in a two processor system, only half of the DIMM slots are available.
This system supports Registered ECC (RDIMM) or Unbuffered ECC (ECC UDIMM) or Load Reduced (LRDIMM) memory.
Mixing RDIMM, ECC UDIMM and LRDIMM is not supported within this system.
If only one processor is installed, only 12 DIMM slots are available.
When populating with two processors 24 DIMM slots are available.
No more than two ECC UDIMMs may be installed per channel (2DPC).
It is recommended to install UDIMMs in first and third banks, leaving second bank (sockets 2, 5, 8, and 11) open.
1.35V LV RDIMMs up to 2DPC.
Adding additional memory of 3DPC will raise voltage to 1.5V.
Depending on the memory configuration and processor model, the memory speed may run at 1600MHz, 1333MHz or 1066MHz.
See latest ProLiant QuickSpecs for processor models and supported memory speeds.
4GB DDR3-1333 Reg ECC modules come in two versions: 313/4G using x4 and 3138/4G using x8 DRAM.
The two parts may be installed in the same system but not within the same memory bank.
Use like modules for dual and triple channel operation
To maximize performance, balance the total memory capacity between all installed processors.
This system supports Registered ECC (RDIMM) or Unbuffered ECC (ECC UDIMM) or Load Reduced (LRDIMM) memory.
Mixing RDIMM, ECC UDIMM and LRDIMM is not supported within this system.
If only one processor is installed, only 12 DIMM slots are available.
When populating with two processors 24 DIMM slots are available.
No more than two ECC UDIMMs may be installed per channel (2DPC).
It is recommended to install UDIMMs in first and third banks, leaving second bank (sockets 2, 5, 8, and 11) open.
1.35V LV RDIMMs up to 2DPC.
Adding additional memory of 3DPC will raise voltage to 1.5V.
Depending on the memory configuration and processor model, the memory speed may run at 1600MHz, 1333MHz or 1066MHz.
See latest ProLiant QuickSpecs for processor models and supported memory speeds.
4GB DDR3-1333 Reg ECC modules come in two versions: 313/4G using x4 and 3138/4G using x8 DRAM.
The two parts may be installed in the same system but not within the same memory bank.
Use like modules for dual and triple channel operation
Populate DIMMs from heaviest load (quad-rank) to lightest load (single-rank) within a channel.
This system supports Registered ECC (RDIMM) or Unbuffered ECC (ECC UDIMM) or Load Reduced (LRDIMM) memory.
Mixing RDIMM, ECC UDIMM and LRDIMM is not supported within this system.
If only one processor is installed, only 12 DIMM slots are available.
When populating with two processors 24 DIMM slots are available.
No more than two ECC UDIMMs may be installed per channel (2DPC).
It is recommended to install UDIMMs in first and third banks, leaving second bank (sockets 2, 5, 8, and 11) open.
1.35V LV RDIMMs up to 2DPC.
Adding additional memory of 3DPC will raise voltage to 1.5V.
Depending on the memory configuration and processor model, the memory speed may run at 1600MHz, 1333MHz or 1066MHz.
See latest ProLiant QuickSpecs for processor models and supported memory speeds.
4GB DDR3-1333 Reg ECC modules come in two versions: 313/4G using x4 and 3138/4G using x8 DRAM.
The two parts may be installed in the same system but not within the same memory bank.
Use like modules for dual and triple channel operation
Heaviest load (DIMM with most ranks) within a channel goes furthest from the processor.
This system supports Registered ECC (RDIMM) or Unbuffered ECC (ECC UDIMM) or Load Reduced (LRDIMM) memory.
Mixing RDIMM, ECC UDIMM and LRDIMM is not supported within this system.
If only one processor is installed, only 12 DIMM slots are available.
When populating with two processors 24 DIMM slots are available.
No more than two ECC UDIMMs may be installed per channel (2DPC).
It is recommended to install UDIMMs in first and third banks, leaving second bank (sockets 2, 5, 8, and 11) open.
1.35V LV RDIMMs up to 2DPC.
Adding additional memory of 3DPC will raise voltage to 1.5V.
Depending on the memory configuration and processor model, the memory speed may run at 1600MHz, 1333MHz or 1066MHz.
See latest ProLiant QuickSpecs for processor models and supported memory speeds.
4GB DDR3-1333 Reg ECC modules come in two versions: 313/4G using x4 and 3138/4G using x8 DRAM.
The two parts may be installed in the same system but not within the same memory bank.
Use like modules for dual and triple channel operation
Do not mix UDIMMs, RDIMMs or LRDIMMs.
Quad rank LR DIMMs are supported at 3 DIMMs per channel.
This system supports Registered ECC (RDIMM) or Unbuffered ECC (ECC UDIMM) or Load Reduced (LRDIMM) memory.
Mixing RDIMM, ECC UDIMM and LRDIMM is not supported within this system.
If only one processor is installed, only 12 DIMM slots are available.
When populating with two processors 24 DIMM slots are available.
No more than two ECC UDIMMs may be installed per channel (2DPC).
It is recommended to install UDIMMs in first and third banks, leaving second bank (sockets 2, 5, 8, and 11) open.
1.35V LV RDIMMs up to 2DPC.
Adding additional memory of 3DPC will raise voltage to 1.5V.
Depending on the memory configuration and processor model, the memory speed may run at 1600MHz, 1333MHz or 1066MHz.
See latest ProLiant QuickSpecs for processor models and supported memory speeds.
4GB DDR3-1333 Reg ECC modules come in two versions: 313/4G using x4 and 3138/4G using x8 DRAM.
The two parts may be installed in the same system but not within the same memory bank.
Use like modules for dual and triple channel operation
DIMMs of different voltages (1.35 V & 1.5 V) may be mixed in any order.
The system will power them at the higher voltage.
This system supports Registered ECC (RDIMM) or Unbuffered ECC (ECC UDIMM) or Load Reduced (LRDIMM) memory.
Mixing RDIMM, ECC UDIMM and LRDIMM is not supported within this system.
If only one processor is installed, only 12 DIMM slots are available.
When populating with two processors 24 DIMM slots are available.
No more than two ECC UDIMMs may be installed per channel (2DPC).
It is recommended to install UDIMMs in first and third banks, leaving second bank (sockets 2, 5, 8, and 11) open.
1.35V LV RDIMMs up to 2DPC.
Adding additional memory of 3DPC will raise voltage to 1.5V.
Depending on the memory configuration and processor model, the memory speed may run at 1600MHz, 1333MHz or 1066MHz.
See latest ProLiant QuickSpecs for processor models and supported memory speeds.
4GB DDR3-1333 Reg ECC modules come in two versions: 313/4G using x4 and 3138/4G using x8 DRAM.
The two parts may be installed in the same system but not within the same memory bank.
Use like modules for dual and triple channel operation
DIMMs of different speed grades may be mixed in any order.
The system will select a common optimal speed.
This system supports Registered ECC (RDIMM) or Unbuffered ECC (ECC UDIMM) or Load Reduced (LRDIMM) memory.
Mixing RDIMM, ECC UDIMM and LRDIMM is not supported within this system.
If only one processor is installed, only 12 DIMM slots are available.
When populating with two processors 24 DIMM slots are available.
No more than two ECC UDIMMs may be installed per channel (2DPC).
It is recommended to install UDIMMs in first and third banks, leaving second bank (sockets 2, 5, 8, and 11) open.
1.35V LV RDIMMs up to 2DPC.
Adding additional memory of 3DPC will raise voltage to 1.5V.
Depending on the memory configuration and processor model, the memory speed may run at 1600MHz, 1333MHz or 1066MHz.
See latest ProLiant QuickSpecs for processor models and supported memory speeds.
4GB DDR3-1333 Reg ECC modules come in two versions: 313/4G using x4 and 3138/4G using x8 DRAM.
The two parts may be installed in the same system but not within the same memory bank.
Use like modules for dual and triple channel operation
Memory speed is a function of the processor QPI bus speed.
This system supports Registered ECC (RDIMM) or Unbuffered ECC (ECC UDIMM) or Load Reduced (LRDIMM) memory.
Mixing RDIMM, ECC UDIMM and LRDIMM is not supported within this system.
If only one processor is installed, only 12 DIMM slots are available.
When populating with two processors 24 DIMM slots are available.
No more than two ECC UDIMMs may be installed per channel (2DPC).
It is recommended to install UDIMMs in first and third banks, leaving second bank (sockets 2, 5, 8, and 11) open.
1.35V LV RDIMMs up to 2DPC.
Adding additional memory of 3DPC will raise voltage to 1.5V.
Depending on the memory configuration and processor model, the memory speed may run at 1600MHz, 1333MHz or 1066MHz.
See latest ProLiant QuickSpecs for processor models and supported memory speeds.
4GB DDR3-1333 Reg ECC modules come in two versions: 313/4G using x4 and 3138/4G using x8 DRAM.
The two parts may be installed in the same system but not within the same memory bank.
Use like modules for dual and triple channel operation
Population guidelines:
This system supports Registered ECC (RDIMM) or Unbuffered ECC (ECC UDIMM) or Load Reduced (LRDIMM) memory.
Mixing RDIMM, ECC UDIMM and LRDIMM is not supported within this system.
If only one processor is installed, only 12 DIMM slots are available.
When populating with two processors 24 DIMM slots are available.
No more than two ECC UDIMMs may be installed per channel (2DPC).
It is recommended to install UDIMMs in first and third banks, leaving second bank (sockets 2, 5, 8, and 11) open.
1.35V LV RDIMMs up to 2DPC.
Adding additional memory of 3DPC will raise voltage to 1.5V.
Depending on the memory configuration and processor model, the memory speed may run at 1600MHz, 1333MHz or 1066MHz.
See latest ProLiant QuickSpecs for processor models and supported memory speeds.
4GB DDR3-1333 Reg ECC modules come in two versions: 313/4G using x4 and 3138/4G using x8 DRAM.
The two parts may be installed in the same system but not within the same memory bank.
Use like modules for dual and triple channel operation
There are four (4) channels per processor; eight (8) channels per server.
There are three (3) DIMM slots for each memory channel; twenty-four (24) total slots.
This system supports Registered ECC (RDIMM) or Unbuffered ECC (ECC UDIMM) or Load Reduced (LRDIMM) memory.
Mixing RDIMM, ECC UDIMM and LRDIMM is not supported within this system.
If only one processor is installed, only 12 DIMM slots are available.
When populating with two processors 24 DIMM slots are available.
No more than two ECC UDIMMs may be installed per channel (2DPC).
It is recommended to install UDIMMs in first and third banks, leaving second bank (sockets 2, 5, 8, and 11) open.
1.35V LV RDIMMs up to 2DPC.
Adding additional memory of 3DPC will raise voltage to 1.5V.
Depending on the memory configuration and processor model, the memory speed may run at 1600MHz, 1333MHz or 1066MHz.
See latest ProLiant QuickSpecs for processor models and supported memory speeds.
4GB DDR3-1333 Reg ECC modules come in two versions: 313/4G using x4 and 3138/4G using x8 DRAM.
The two parts may be installed in the same system but not within the same memory bank.
Use like modules for dual and triple channel operation
Memory channels1 and 3 consists of the three (3) DIMMs that are furthest from the processor.
Memory channel 2 and 4 consists of the three (3) DIMMs that are closest to the processor.